Loading Events

Fatigue Design, Verification and Validation of Mechanical Equipment

November 30 @ 3:00 pm - 4:00 pm

Past event



The live presentation of this event has already taken place.

Please view the PDF slides here or watch the video recording below:

This webinar outlines the recommended engineering processes and practices for overall and detailed design to reduce the potential for the occurrence of fatigue cracking damage in operation. Design verification and validation methods are included. Outlined in each step are the actions to be taken, and the standards and reference documents to be followed. This ensures that all defined steps are followed and recorded to deliver a product to address design for fatigue loading. 11 case studies are included.

The webinar details the 3D geometrical form of the equipment, particularly at joints and transitions, which are needed to suitably accept the loading conditions, by providing good structural continuity and load paths in a holistic design manner.

This webinar includes general fatigue design issues and 11 case studies the author has been involved in as principal engineering consultant, summarising what the design shortcomings were, where the fatigue issues occurred, and what the design rectification solutions were. It is trusted that the text will be of use to undergraduate, graduate as well as more senior engineers in bringing good fatigue design practices to the overall design and manufacturing processes.

Fatigue design verification methods are also summarised, specifically in the use of computational finite element methods and correlation of the outputs with the typical fatigue analysis standards BS7608 and the numerous IIW fatigue codes. Iterations of the verification and design process must be completed to result in a fit for purpose design solution of required operational life.

Finally fatigue validation (via strain gauging and vibration monitoring etc) methods are summarised, again along with the iterative use of design / verification / validation actions as may be needed.

The webinar aims to assist attendees to achieve a suitable engineering practice based understanding of the nature of fatigue loadings, how and why they are usually very damaging to mechanical equipment and plant subjected to them, and the design / verification / validation skills and techniques needed to ensure such equipment and plant can withstand these loadings over a suitably long design life. The webinar will not be written from a metallurgy or materials science basis – rather a practical engineering design basis.

Key takeaways from this webinar:

  • Gain a practical understanding of the fundamentals of good design , verification and validation processes for fatigue operational conditions across a range of mechanical equipment and plant.
  • Learn the nature and application of the critical sequential and iterative steps in the combined fatigue design / verification / validation process so that none are missed, all are applied in the correct order and with the required intensity, so that product function, quality, durability and integrity results.
  • Become aware of the nature of fatigue loadings – low cycle, medium/high cycle, cumulative fatigue - rainflow analysis, cycle and damage histograms. Gain exposure to the fatigue design and operational conditions of numerous heavy industry mechanical equipment and plant types, so that such knowledge can be applied in their own day to day design, fabrication, and maintenance activities.

Presenter: Mr. Rob Widders, Principal Consulting Engineer & Mechanical/Heavy Industry Expert

Mr. Rob Widders. BE (Hons1 Mech USyd), MEngSc (UNSW). Principal Consulting Engineer with global machinery engineering consulting company. 42 years in heavy industry since graduation. Also see provided resume file.
Completion of all mechanical engineering technical and project management activities, hands-on actions in design and analysis, fabrication works and operational site visits, troubleshooting and design rectifications, quality assurance and management, maintenance and repair scopes and planning including turnaround site participation, reporting and technical writing, tendering and proposals, presentation of results and forward plans including budgets, invoicing, office management, guiding and mentoring staff, business development. Projects completed in all states Australia wide as well as NZ, PNG, Indonesia, Fiji, Laos, Korea, China, Germany, Africa, USA and Sweden (including travel to all these locations). Clients have included many mining and mineral processing plants and manufacturers (Alcoa, Ok Tedi, Newcrest, Sino Gold, Sino Iron, Sedgman, Ausenco, Metso, Outotec) and heavy industry (Komatsu, CSR Sugar, ANI Ruwolt, Howden Group, EDI Rail, Nuplex, BOC etc). 1998-2007 Adjunct Senior Lecturer Sydney University Aerospace, Mechanical and Mechatronic Engineering Final Year Mechanical Design course, also supervising many theses students. 2017-21 presented 1st and 4th year professional engineering classes.
Achievements would include;

  1. Successful completion of heavy industry professional consulting projects globally over 42 years.
  2.  Numerous heavy industry “one-off” troubleshooting and design rectification projects completed globally, of world standard, solving complex mechanical equipment and plant original design and operational problems.
  3.  Initiation of Sydney office of global consulting engineering practice from scratch in 1996, building and taking it to the best performing office in 2005-7.
  4.  Presenting numerous papers to engineering conferences.
  5. Invited to serve as Adjunct Senior Lecturer Sydney University Aerospace, Mechanical and Mechatronic Engineering Final Year Mechanical Design course 1998-2007, also supervising many theses students. 2017-21 presented 1st and 4th year professional engineering classes. Participated in three AMME reviews the last 2017.

Postnominals: BE (Hons1 Mech USyd), MEngSc (UNSW).
1980-2018 - Fellow of the Institution of Engineers, Australia. Member of the Mechanical College, CPEng, NER.
2014 to 2018 - Registered Professional Engineer of Queensland (RPEQ).
1996 to June 2008 – Fellow of the Royal Institution of Naval Architects.


Join us to learn more at this must-attend event for engineering professionals and aspiring engineers alike.

Reserve your spot at this free webinar today!

  • The webinar will be recorded and will be sent out to registered attendees afterwards.
  • A certificate of attendance will be provided to attendees who request one near the end of the live webinar session.

Please note: the time stated on this event is in Australian Western Standard Time (AWST). You will need to convert this to your own time zone.

Details

Date:
November 30
Time:
3:00 pm - 4:00 pm
Event Category:
Website:
458251892747

Venue

Online
Past event


  • This field is for validation purposes and should be left unchanged.
新蒲萄京官方载首页 | Engineering Institute of Technology